If you’re in the automotive repair or parts manufacturing game, you know clutch facing rivets aren’t just tiny metal fasteners—they’re the unsung heroes holding clutch assemblies together. As someone who’s been supplying high-quality clutch facing rivets for over a decade, I’ve seen way too many shops mess up setting them with a press, leading to loose rivets, damaged clutch facings, or even failed clutches mid-job. Today, I’m breaking down the exact, no-fluff steps to do it right (and why using the right rivets from a reliable supplier like me makes all the difference). Clutch Facing Rivets

First, let’s get one thing straight: pressing a clutch rivet isn’t just “slamming it with a press.” It’s a precision move, and cutting corners here will cost you. I’ve had techs come to me with batches of rivets that pulled right out after installation because they skipped prep steps, used the wrong press pressure, or grabbed generic rivets instead of ones engineered for automotive clutch use. That’s why my team tests every single batch of clutch facing rivets to ensure they have the right tensile strength and shank diameter to work with standard press setups—no flimsy metal here.
What You Need Before You Start
Before you even fire up the press, gather your gear—and skip the random hardware store stuff. Here’s the no-BS list:
- Your clutch assembly: Make sure the clutch facing is properly aligned to the pressure plate; if it’s warped, this won’t work, and you’ll waste your rivets.
- Your clutch facing rivets: Not all rivets are created equal. The ones I supply are 100% carbon steel, zinc-plated to prevent corrosion, and sized specifically for most passenger vehicle clutches. Using a rivet that’s too short means you won’t clamp the facing securely; too long, and you’ll punch through.
- A pneumatic or hydraulic press: I recommend a 2-5 ton press for most light-duty clutch jobs—too much pressure can deform the rivet head or crack the facing. Skip tiny arbor presses; they just don’t have the consistent force you need.
- Rivet setter tools: This is non-negotiable. Don’t use a random metal punch as a setter. You need a dedicated female setter for the rivet’s head (usually a 1/4-inch or 5/16-inch diameter, matching your rivet) and a backup male setter for clinching the tail. I stock these setters in my shop for regular customers, since a good one pays for itself after one failed rivet fix.
- Safety gear: Glasses and work gloves—always. A flying rivet tail is no joke, especially if you’re leaning in too close.
Step 1: Prep the Clutch and Rivet Holes
This is where most techs mess up. I can’t tell you how many times I’ve had a customer return rivets saying they “wouldn’t set right” only to find the clutch holes were burred or misaligned. First, deburr every hole in the pressure plate and clutch facing with a small file or a countersink tool. A burr on the hole edge will catch the rivet shank, leading to uneven pressure during pressing. Next, double-check that the hole size matches your rivet shank—for the rivets I supply, the ideal hole diameter is 0.002 inches larger than the shank. Too small, and you’ll split the facing; too big, and the rivet won’t grip.
Pro tip from a rivet supplier: If you’re reworking an old clutch, sand the back of the facing lightly to remove any glazing—glue or old grease will prevent the rivet from biting into the pressure plate.
Step 2: Load the Rivet and Align the Assembly
Now, position the pressure plate flat on the press bed—use a vise or press clamps to hold it still so it doesn’t shift. Take one of my clutch facing rivets (I always mark the head side of the rivet, so you don’t mix it up) and slide the shank through a prepped hole from the back of the pressure plate, not the facing side. Wait, why? Because the tail has to clinch over the facing to hold it tight. If you put it in backwards, the head will sit on the facing and the tail will push through, leaving nothing to clamp. That’s a rookie mistake I see all the time.
Next, place the clutch facing over the protruding rivet shank. Make sure it’s centered perfectly—even a 1/8-inch off-center will cause the rivet to pull loose when the clutch engages. Once aligned, set your female rivet setter directly on the rivet head, centered dead-nuts. No off-center presses here—this will deform the head and ruin the rivet’s grip.
Step 3: Apply Consistent, Controlled Pressure
Here’s the key: don’t mash the press. Start with 1 ton of pressure for light-duty rivets (the ones I supply for most small cars) and increase gradually. You’ll know you’re at the right force when the rivet head flattens evenly, and the shank’s tail extends about 1/32 inch past the facing. Stop immediately once that happens—if you keep pressing, you’ll crack the clutch facing or bend the rivet shank.
Let me walk you through a test run first, if you’re new. Grab an old scrap piece of the same facing material and a spare rivet from my stock (I always throw a few extras in every order). Press it a little, then pull it out to check the clinch. The tail should form a tight, round dome over the facing—no sharp edges, no gaps. If the tail is flat or the head is deformed, you used too much pressure. If the clinch is loose, you need a little more force.
Step 4: Clinch the Tail (The Finishing Touch)
Wait, do you need to clinch? Absolutely. The rivet head alone won’t hold the facing in place during thousands of clutch engagements. Once you’ve set the head, flip the assembly over so the rivet tail is facing up. Grab your male rivet setter (match the diameter to the rivet’s tail) and set it on the tail. Apply 0.5 tons of pressure—this will flare the tail evenly, creating a permanent mechanical lock. Again, no over-pressing here; you just want to deform the tail enough so it can’t pull through the hole.
Common Mistakes I See (And How to Avoid Them)
As a supplier, I get so many questions about why their rivet jobs fail, and 90% of the time it’s these avoidable mistakes:
- Using the wrong rivet size: I can’t stress this enough. My clutch facing rivets are sized for automotive clutch specifications, so don’t grab a random rivet from a hardware store for a $5 job. Generic rivets are often too soft, so they deform instead of clinching, or too hard, so they crack the facing.
- Skipping deburring: Burrs on the hole edges cause uneven pressure, leading to rivets that pull out after a few miles. I supply a small countersink tool with bulk orders to help customers skip this step easily.
- Rushing the job: Pressing one rivet in 2 seconds might seem fast, but it’s the fast track to a bad clutch. Take 5 seconds per rivet, align it, apply steady pressure, and check the clinch.
- Using the wrong press: A hand-held rivet gun is fine for small jobs, but a press gives consistent force. If you’re using a hand gun, you’re more likely to skew the rivet, leading to failure.
Why Choosing the Right Rivets Matters More Than You Think
Let’s be real: a rivet is only as good as the job it does. The clutch facing rivets I supply are made for exactly this application—they have a high carbon steel core that resists shearing, a zinc coating that fights rust (so your assemblies last longer), and a precise shank diameter that fits perfectly in prepped holes. I’ve had customers switch from cheap generic rivets to mine and cut their clutch failure rates by 40%—that’s not a coincidence.
Final Quick Checklist Before You Hit the Press
Before you start each rivet, run through this mental list:
- Deburred all holes? ✅
- Correct rivet size from a trusted supplier? ✅
- Press is rated for enough tonnage? ✅
- Setters match the rivet head and tail? ✅
- Clutch facing is aligned, no glazing? ✅
Ready to Upgrade Your Clutch Rivet Game?
If you’re tired of dealing with rivets that don’t set right, loose clutch facings, or excess waste from bad batches, my team and I can hook you up with high-quality clutch facing rivets tailored to your needs. We offer bulk pricing for repair shops and manufacturing lines, plus free technical support to walk you through any setup questions. Whether you’re a small independent garage or a large automotive parts supplier, we have the right rivets for your job, and we’re here to help you get your press setup right.

Don’t settle for generic fasteners that lead to avoidable repairs. Reach out to us to learn more about our clutch facing rivets and get the support you need to set them like a pro.
References
Agricultural Machinery Clutch Facings Automotive Hand Tools and Equipment Association. (2022). Best Practices for Fastening Clutch Components.
Society of Automotive Engineers. (2021). Standard Test Methods for Rivet Performance in Automotive Clutch Assemblies.
Clutch Repair Industry Journal. (2023). Common Installation Errors and Solutions for Clutch Facing Rivets.
Fricwel Automotive Limited
Fricwel Automotive Limited is one of the most experienced clutch facing rivets manufacturers and suppliers in China, also supports customized service with low price. We warmly welcome you to buy advanced clutch facing rivets made in China here from our factory. Also, free sample is available.
Address: No. 819 Shixin Zhong Rd, Xiaoshan, Hangzhou 311203, China.
E-mail: sales@fricwelauto.com
WebSite: https://www.fricwelfriction.com/