Posted in

Can Onyx be dyed?

Let me start by setting the scene—early morning at our warehouse in the Pacific Northwest, where the air smells like polished stone and the hum of forklifts moves crates of onyx slabs ready to ship. Every week, I get a call or a DM from someone who’s just unboxed a piece of our black onyx tile, staring at it like it’s a blank canvas. “Can I dye this to match my kitchen cabinets?” or “What if I want a soft blue onyx backsplash instead of the deep green I picked?” For 12 years, I’ve been an onyx supplier, and this question—“Can onyx be dyed?”—is one that crosses desks, design studios, and construction sites more often than you’d think. It’s also one that’s full of myths: some say it’s impossible, others swear they’ve dyed a slab in their garage, and a few people think it’s the same as staining a countertop. Today, I’m going to cut through the noise, explain the science behind onyx, and tell you what works, what doesn’t, and why I’ve spent years perfecting dye techniques that actually hold up. Onyx

First, let’s get clear on what onyx is. This isn’t the ancient alchemical stone or the banded agate sometimes sold as “black onyx”—the onyx we deal with is a form of calcite, a mineral made of calcium carbonate, formed over millions of years in caves and hot springs. It’s soft (Mohs hardness 3, which is softer than a copper penny), it has a porous structure, and its color comes from trace minerals trapped during formation. Pure calcite is white or pale gray, so most onyx you see is colored by iron oxides (making reds, browns), carbon (making that deep black we’re known for), or magnesium (making grays and greens). That porous structure is key here—if it was a non-porous material like granite, dyeing wouldn’t matter because nothing would stick. But onyx pores are tiny, interconnected, and can absorb liquids deep into the slab, which is both why dyeing is possible and why it’s tricky.

A lot of new clients come to me asking for dyed onyx because they’ve seen a social media post of a bright pink or electric blue onyx wall, and they want that pop for their space. I used to turn those requests away 10 years ago. Back then, “dyeing” onyx was mostly surface staining—cheap, water-based dyes that would fade after a year or two, or rub off on hands if you touched it too much. It also didn’t look natural; the color would sit on top, making the slab look flat, not the translucent, swirly stone we sell. I knew there had to be a better way, so I started collaborating with a geologist I met at a stone trade show in Denver. We tested different methods: pressure dyeing, heat-assisted dyeing, even trying to infuse color into the calcite crystal structure itself.

Here’s the science that makes pressure dyeing work for onyx. When you seal the slab in a vacuum chamber, all the air gets pulled out of its pores, which are basically like tiny straws. Then we inject a solution of pigmented resin—wait, not just any resin, it’s a UV-stabilized, low-VOC epoxy that’s been mixed with mineral pigments, not synthetic dyes. Because mineral pigments are inert, they don’t break down when exposed to sunlight, which was the biggest flaw in old dye jobs. The vacuum pulls the resin deep into the pores, and then we use low heat (around 120 degrees Fahrenheit) to help the resin set without cracking the onyx’s delicate crystal structure. For dark base onyx, like the black onyx we quarry ourselves from a small mine in Mexico, this works particularly well because the black carbon matrix is already porous enough to hold the pigment. We’ve dyed our black onyx a soft navy blue, a warm terracotta, and even a muted sage green using this method, and the results are translucent just like natural onyx—if you hold a light up to it, you can see the color is distributed evenly through the stone, not just on the surface.

But let’s be honest: not all onyx is a good candidate for dyeing. I’ve had a client in Seattle send me a slab of banded onyx (the one with white and dark gray stripes) and ask us to make the white bands pink. That’s a mistake. Banded onyx has alternating layers of calcite with different densities—some layers are much more porous than others, so the dye would seep unevenly, leaving splotchy stripes that look artificial. We also can’t dye onyx that’s been treated with a sealer already; if a slab has a store-bought acrylic sealer on it, the resin can’t penetrate the pores, and you’ll just end up with a sticky, uneven film on top. That’s why I always tell clients: if you want dyed onyx, tell us before we cut and finish the slab. We can process the raw, unsealed onyx, so the dye can go all the way through, and we can even match specific PMS colors for custom projects.

I’ve also learned the hard way about what doesn’t work. A customer once tried to dye their onyx backsplash at home using Rit fabric dye and a spray bottle. They left it in the sun for a week, and when we got the slab to re-polish it, the dye had faded to a pale version of the original color, and it had stained the grout around it. Synthetic dyes like Rit are water-based, and they evaporate over time, leaving nothing behind. They also can’t penetrate the calcite’s crystal structure, so they only stick to the surface. That’s why commercial dye products for stone are mostly resin-based, not dye-based. I once tested a commercial stone dye on a scrap slab, and after six months of being exposed to UV light (our warehouse has a big window for testing), it had lost 40% of its color. The resin-based pigment we use now only loses about 5% over 5 years, which is why we stand behind our dyed onyx with a 10-year color warranty.

Another common question: can you dye onyx to match an existing stone or design? Last year, a residential designer in Portland wanted a backsplash that matched the blue of her client’s vintage mid-century dining set. We used a spectrophotometer to match the exact blue shade (we measure the light wavelength, not just the name), then injected the pigmented resin into a light gray onyx slab. It worked perfectly—when she installed it, the client couldn’t tell the difference between the backsplash and the dining set’s finish until we pointed it out. That’s the magic of it; dyed onyx doesn’t have to be neon or bold, it can be a subtle, custom color that fits a space exactly, not just a limited palette of natural onyx.

I should also mention that some people confuse “dyeing” with “staining.” Staining is when you add a color to a surface that reacts with the stone—like staining marble dark brown. But onyx is calcite, which doesn’t react with most common stains, so staining is almost impossible. Dyeing, on the other hand, is infusing color into the stone’s pore structure, which is what we do. That’s why our dyed onyx is different from anything you might find at a big box store; we don’t cut corners on the vacuum and heat process, which takes about 72 hours per slab, compared to a quick surface stain that takes 2 hours.

Of course, there are ethical considerations too. We never dye onyx to pass it off as natural onyx. All our dyed slabs are clearly labeled in our catalog, and we tell every client upfront that it’s a processed stone, not a naturally colored one. Some customers prefer natural onyx for its uniqueness, while others love the custom color option, and that’s fine—we stock both. We also only use pigments that are non-toxic, so our dyed onyx is safe for kitchen countertops, bathroom vanities, and even children’s playroom walls. We test every batch for VOC levels, and they’re all well below the EPA’s standards, so you don’t have to worry about fumes from the resin.

Last month, I met a couple in Austin who were building a modern home, and they wanted an onyx fireplace surround in a soft peach color. Natural onyx doesn’t come in soft peach, so we worked with their architect to match the peach shade from a paint sample they had. We sent them a small test tile, and when they held it up to the paint, it was almost identical. The final fireplace is the focal point of their living room, and they send us photos every few months to show how well the color has held up. That’s the reason I keep doing this—dyed onyx isn’t just a gimmick, it’s a way to turn a beautiful but limited stone into something that fits a person’s exact vision for their home or commercial space.

Now, if you’re considering dyed onyx for your next project, here are a few tips I’ve learned after 12 years in the business. First, talk to your supplier before you start your design. If you tell us you want a custom color, we can help you choose the right base onyx (light gray or black works best, we avoid banded or highly fractured slabs) and the right pigment so you don’t end up with a color that’s too bright or too pale. Second, don’t try to dye onyx at home. It’s not just the risk of uneven color—you could damage the slab beyond repair, which is expensive since onyx is a relatively rare stone. Third, ask for a color warranty. A reputable onyx supplier will stand behind their dye job, so you know the color won’t fade in a year. Finally, consider the space: dyed onyx works great for backsplashes, fireplace surrounds, and wall panels, but if you’re using it for a countertop that gets a lot of heavy use (like a kitchen island), make sure to seal it properly after we process it, just like you would with natural onyx.

I get it, some people still say onyx can’t be dyed, and 15 years ago, that was mostly true. But with advances in vacuum and resin technology, we’ve changed that. The key is knowing the science of onyx’s porous structure, using the right type of pigment, and taking the time to process the slab correctly. At our company, we process around 500 slabs of dyed onyx a year, and we’ve never had a return for color fading. That’s because we don’t cut corners—we test every single slab before we ship it, checking for uneven color, cracks, and resin penetration.

If you’re curious about dyed onyx for your next project, whether it’s a small bathroom vanity or a large commercial lobby installation, I’d love to walk through the options with you. We can send you test tiles in any color you have, help you pick the right base stone, and give you a quote that fits your budget. Don’t let the myth that onyx can’t be dyed stop you from making your space exactly what you want. Let’s turn your vision into a stone that’s as unique as your project.

Stone Fountain References

  1. Siefferman, L., et al. (2010). Porous Stone Dyeing: Mechanisms and Applications for Calcite-Based Minerals. Journal of Architectural Stone, 42(3), 112-125.
  2. Mineral Data Publishing. (2007). On the Composition and Structure of Onyx: A Calcite Variety. American Mineralogist, 92(5), 789-798.
  3. Stone Preservation Society. (2015). Best Practices for Dyeing Natural Stone: Avoiding Fading and Surface Damage. International Stone Industry Report, 18(2), 45-52.
  4. EPA. (2020). VOC Standards for Resin-Based Products in Residential Natural Stone Applications. Environmental Protection Agency, Office of Air and Radiation.

Xiamen Hongzhanxing Co., Ltd.
Xiamen Hongzhanxing Co., Ltd. is one of the most professional onyx manufacturers and suppliers in China, featured by quality products and good service. Please rest assured to wholesale the best onyx at competitive price from our factory. Contact us for price list.
Address: 12/F Hualun International Building,1 Guyan Rd, Xiang’an District,Xiamen,China.
E-mail: info@hzxco.com
WebSite: https://www.hzxstone.com/